Menu Close

What’s new at PAC?

RSIC-SI-X ADM

PAC’s RSIC-SI-X ADM is a new patented low-profile spring isolator that connects directly to Concrete systems providing superior low-frequency isolation compared to typical rubber sound isolation clips. Acoustical test reports coming soon.

RSIC-SI-X CRC

PAC’s RSIC-SI-X CRC is a new patented low-profile spring isolator that connects directly to Concrete systems providing superior low-frequency isolation compared to typical rubber sound isolation clips. Acoustical test reports coming soon.  The RSIC-SI-CRC clips unique universal mounting system allows it to be mounted to wood and steel framed systems.

RSIC-SI-CRC2 LP

Super-Compact Ceiling Hanger

PAC’s RSIC-SI-CRC2 LP Low Profile spring helps the designer achieve the goal of resiliently decoupling the ceiling using only 3-5/8″ of space. The RSIC-SI-CRC2 LP Low Profile system is designed to allow use of double runs of 1-1/2″ cold-rolled channel allowing greater spans and more flexability in desing.

RSIC-SI-FF 3/8″ SPRING ISOLATOR

RSIC-SI-FF 3/8″ BRC and RSIC-SI-FF 3/8″ WRC EZ

The RSIC-SI-FF 3/8 BRC and WRC EZ is a full frame spring and rubber isolator. This spring isolator can be attached by mid-wire to support the drywall grid below. The RSIC-SI-FF 3/8 BRC and WRC EZ is one of the highest performing rubber and spring isolators available for your noise control needs. The spring hanger uses a 3/8 threaded rod and has a 30 degree offset allowed for misalignment.

PAC-IFB

The PAC-IFB is a discrete isolator for floating floors that are designed to provide high performance in a low-profile form factor. Available in a variety of load ranges with detailed product performance data for all, the PAC-IFB has the data engineers need to create solutions that work. The PAC-IFB is made from the same elastomeric material that’s been used for years in Europe. Last of all, due to its unique material properties the PAC-IFB can provide low natural frequencies (down to ~7.5 Hz) with minimal deflection (~¼” for the 2″ thick PAC-IFB2).

RSIC-SI-X

PAC’s RSIC-SI-X is a new patented low-profile spring isolator that provides superior low-frequency isolation compared to typical rubber sound isolation clips. More acoustical tests coming in 2024.

RSIM Recycled Rubber Mat Series

Includes the RSIM PacPro Mat: RSIM-2, RSIM-3, RSIM-5, RSIM-10, RSIM-12, and RSIM-15. Recycled rubber resilient impact sound insulation underlayment. Applicable for a wide range of flooring types: tile, wood, laminate, LVT, and carpet. High level HIIC and IIC noise control. 2mm Delta IIC 16Db, 5mm Delta IIC 19Db. Test reports will be up on the PAC Assembly selector soon.

PAC-AMS (Acoustical Mullion Seal)

The PAC-AMS provides noise control wall terminations. The PAC-AMS installs between the wall end and the aluminum mullion or the glass. The installation is very easy. Simply cut it to length and friction fit it into the opening. PAC-AMS is available in sizes from 1″ to 6″ wide in 1/4″ increments.

Projected STC 52 to 70. Acoustical test reports coming soon.